ADDITIVE MANUFACTURING

Additive manufacturing, selected around the part.

We work across MJF, SLS, SLA, DLP and FDM / FFF for polymer parts. Geometry, material behaviour, detail, finish, quantity and intended use shape the production route. If you know the process, begin there. If not, begin with the part.

Representative polymer components in varied geometries and surface finishes.

SELECTING THE PROCESS

The part determines the route.

No single additive process is right for every requirement. We look at how the part will be used, the geometry and detail it carries, the material behaviour and finish required, the quantity, and what must happen after printing.

  • Function & environment

    Loads, temperature, wear, chemical exposure and service conditions.

  • Geometry & detail

    Overall form, internal features, wall sections and the detail that must be retained.

  • Material behaviour

    Stiffness, toughness, flexibility, thermal response and other application needs.

  • Surface & appearance

    Texture, colour, visual finish and any secondary finishing requirement.

  • Quantity & repeatability

    One-off development parts, batches or an expected production range.

  • Inspection & downstream work

    Critical dimensions, inspection needs, finishing and assembly requirements.

ADDITIVE PROCESSES

Five routes, one starting point: the requirement.

Each process builds differently and brings its own material, geometry and finishing considerations. The descriptions below are starting points; the production system is confirmed against the part.

  • Multi Jet Fusion (MJF)

    Functional PA12 and PA11 parts, supported from prototype quantities through repeat production.

    Explore Multi Jet Fusion
  • Selective Laser Sintering (SLS)

    Laser-sintered polymer powder for complex parts built without separate support structures.

    Explore Selective Laser Sintering
  • Stereolithography (SLA)

    Light-cured resin parts where fine features and smooth surface finish are central to the requirement.

    Explore Stereolithography
  • Digital Light Processing (DLP)

    Projected-light resin production that cures each layer as a complete image for detailed polymer parts.

    Explore Digital Light Processing
  • FDM / FFF

    Thermoplastic filament deposited layer by layer for functional prototypes and engineering parts.

    Explore FDM / FFF

We take an additive requirement from process selection through production, verification and delivery. See how AtomAdd works

START WITH WHAT IS AVAILABLE

A finished specification is not required.

Begin with the information you already have. It helps us understand the part and narrow the process route:

  • CAD model, drawing or physical sample
  • Application and service conditions
  • Quantity or expected production range
  • Material behaviour or preference, if known
  • Surface, colour and finishing expectations
  • Critical dimensions, inspection and delivery requirements

The process and material can remain “Not yet decided.” We will work through the options with you.

SPECIALIST ADDITIVE PRODUCTION

Dental requirements follow their own production system.

Dental models, night guards, splints and selected restorative applications carry application-specific material, curing, finishing and professional-approval requirements. They are presented separately so the case can be considered on its own terms.

Explore Dental 3D Printing

START WITH THE PART

Find the additive route that fits the requirement.

Whether the process is already specified or still open, share what the part needs to achieve. We will work with you to define the manufacturing approach and carry it through to finished parts.